We are a full-line hobby shop serving the sport, 1/4-scale, large aircraft, 30% and bigger, and competition modeler at super prices!
Don’s Flight Tip Don’s Flight Tip
Finding the balance point on your plane is made easy with the
use of Southwest Systems CG machines. These attractive, high-quality anodzed balancers come in 2 sizes. The EZ balancer Lite
is used on planes up to 20 pounds and the large EZ balancer
is used for large 40–50% planes. Easy to use and very popular.
Planes can be balanced either inverted or right side up. Check
our website home page for color photos of this unit. Call for
store direct availability and pricing.
balancer in the world and
1809 S. Broadway, Salina, Kansas 67401
ORDER LINE: 1-800-972-6273
SALES & TECHNICAL QUESTIONS: (785) 827-3222
U.S.A. & INTERNATIONAL FAX Orders: (785) 827-0472
Use A Current Meter When Setting Up Digital Servos
Failure to use a current meter when setting up digital servos results in
high current flow which can result in receiver reboot, less flight time
per charge and in extreme cases burned out servos or a crash due
to the receiver going off line. Modelers who have visited our store are
always surprised when we plug a current meter into their plane and
they see how much current their plane actually draws. Customers
who purchase a current meter from us receive our free 3 page testing
process to insure that their servos are setup correctly.
If you want to learn the systems and procedures to safely setup
your large aircraft and avoid the crashes that others have already
experienced, then you can benefit from our newly released 4th
edition, highly-illustrated book, Gas Engines – Giant Planes. You
can order your copy by calling 800-972-6273. You’ll be glad you did.
DHS Dot Decal
Plane Restraint Electric Gas Pump
Machined Filter T’s Filter Vent Safety Clips
BB Fuse Fittings
Machined Nozzle Machined T’s
¼ Fuel Dots
High- Temp Smoke
CM6 Central Hobby
Servo Screws – Allen Head
These 9/16-inch Allen head screws
with built-in washers are the best,
bar none. Bag of 100 only $6.95.
1/2-inch also available for
hatches and hold-downs
for straps and other
We carry a large variety of props
including: Mejelik, Biela, Xoar,
3W, Bolly, Falcon and Menz. Crosswind Flying has been recommended by 2 AMA
The third edition of Proficient Flying follows in
the footsteps of earlier editions, which have been
reviewed many times in the modeling press and have
been referred to as the Stick and Rudder of RC Flying.
They also include critical flight envelope information
in order to fly safely. $13.95
Newly Released Third Editions from DHS
Titanium Turnbuckles 1½ to 6
inches, carbon fiber rods, high-performance 4–40 and 8/32–10/32
control linkages for your giant
DHS Kevlar Pull-Pull
Looking for hard to find items? We stock a wide variety of what you need to get up in the air!
Hangar 9 Inverza 62 EW!
Check out our brand new web site -
Complete with email support and a downloadable order form.
Are you one of the many modelers that loves to fly but doesn’t enjoy
or have the time to build?
Take the guess-work out of building and give the friendly staff at
Don’s Hobby Shop a call.
Don’s Hobby Shop now offers a Full Kit or ARF build service. You tell
us which plane, motor and electronics, and we’ll do the rest. We will
even make it ready to fly with your transmitter.
CUSTOM TRIM SCHEMES AVAILABLE.
Call Don’s Hobby Shop today for pricing and build schedule.
The spots will fill up fast so don’t hesitate, call today.
NEW AT DON’S HOBBY SHOP: BUILD SERVICE NEW AT DON’S HOBBY SHOP: BUILD SERVICE
Like Don’s Hobby Shop on Facebook!
The Hangar 9 Inverza 62 clearly
reflects what has been missing from
the world of giant-scale freestyle and
precision aerobatics. Match it with the
Evolution® 62GXi 62cc gas engine.
The result is a level unprecedented
performance. Be part of the next