All have dual mounting-hole patterns
for easy installation into all helicopter
brands, with stator construction
using the highest-grade, silicon steel
laminations and ultrahigh-temperature
copper wire for optimum efficiency
and power transfer.
XF series motors use true-grade, high-temperature-rated N455H Neodymium
magnets. Machined slots and a full, 360°
epoxy bond are incorporated at each
magnet location. High-temperature
silicone-wire power leads come
presoldered with 24K bullet connectors.
Wires are easily modified, solder ready,
and protected by a rubber exit-wire
For more information about the XF
Gen3 Brushless Motor Series, a design
presentation and You Tube video are
provided on the KDE Direct website.
Infinity XBus Dedicated DMSS
Receiver $119.99 + S&H
from JR Americas, Box 8757,
Champaign IL 61826; Tel.:
(800) 338-4639; website: www.
JR Americas introduces the Infinity
RGO31BX receiver, the world’s first
unlimited channel, dedicated serial-bus-specific receiver. The number of
channels it can support is limited only
to the number of channels you control
with your transmitter.
The 7-gram Infinity receiver is barely
larger than its remote antennas. JR’s
patented Intelligent Output System
(IOS) sends data from all channels as
one complete signal frame for pure
control. Designed exclusively for use
with XBus systems, the Infinity features
real-time telemetry data.
The two ports on its face support
the XBus link and telemetry sensor
input. Path diversity and a solid link
are ensured by the included RAO1TL
remote and two RAO1L remotes.
The DMSS RF link guards against
interference from other radios turned
on within the range of your aircraft.
With failsafe support on all channels
and easy-to-view status condition
LEDs, the Infinity RGO31BX receiver
is suitable for a wide variety of
LiPo Safe Charging Bags $9.95-
$15.95 + S&H from Common
Sense RC, Box 3546, Chatsworth
CA 91313; Tel.: (866) 405-8811;
Common Sense RC has revamped its
line of LiPo Safe Charging and Storage
Bags. Not only has the price been
reduced by approximately 50%, but
several design improvements have been
made, including the addition of three
All of the LiPo Safe Charging and
Storage Bags are made from durable,
fire-resistant materials. With a secure,
heavy-duty Velcro closure and vents to
reduce pressure, the bags are designed
to help contain heat and flames that
result when a LiPo combusts during
charging or while in storage.
The new LiPo Safe Charging Bags
come in five sizes. The original 9 x
12-inch bag is the right size to fit
everything from small 3.7-volt LiPos
to 8S LiPos. The 7 x 9-inch Mini LiPo
Safe bag fits 6S 5,000 mAh LiPos. The
Ultra Mini, at 4 x 8 inches, is perfect
for most 4S and smaller batteries. The
Pocket 3 is designed as the perfect size
and shape to fit single, standard 3S
LiPos, and the Pocket 6 accommodates
standard 6S LiPos up to 5,000 mAh.
DLE- 120 Twin Gas Engine @
$749.99 + S&H from Hobbico, 3002
N. Apollo Dr., Suite #1, Champaign
IL 61822; Tel.: (800) 637-7660;
Do you want enough power to propel
even large-scale aircraft into intense
3-D maneuvers? Look no further
than the DLE- 120 twin gas engine.
At 12 hp, the DLE- 120 delivers more
than 50 pounds of static thrust. The
twin, opposed-cylinder design reduces
vibration, which increases performance
and reduces engine and airframe wear.
Parts for the DLE- 120 are CNC
machined for high performance and
long life. The magnesium crankcase
makes this engine strong and light.
Lightweight pistons provide fast
acceleration, excellent compression,
and low vibration, while the crankshaft
bearings are sealed. An electronic
ignition delivers an ultrasmooth idle
for easy starting and superb throttle
The electronic ignition module,
matching mufflers, spark plugs,
standoffs, spiral wire wrap, and
connector safety clips are included.
Unleaded gas, two-cycle oil, an ignition
battery, and propeller are required.
19 Model Aviation MAY 2014